Pallet of (22) Pentium Systems

Only $599.00: Buy Now and Save!

Pallet of (22) Pentium Systems ** Pallet of (22) Working Pentium Systems **This pallet consists of 22 working systems. They all have been tested and work great. Brands are IBM, Dell, Gateway, Compaq, and many clones. Here is the breakdown:1 - Cidex P133 48MB 850MB 2.1GB1 - Dell P75 8MB 540MB1 - Cidex P200 96MB 2.1GB1 - Gateway P75 32MB 1GB1 - Tangent P66 32MB 240MB HDD1 - MBC P66 8MB 250MB1 - Cidex P133 64MB 2.1GB1 - Gateway P75 32MB NoHDD1 - Everex P100 32MB 1.2GB1 - NEC P75 32MB 850MB1 - Dell P100 32MB NoHDD1 - IBM 486-33 4MB 850MB1 - Cidex P133 64MB 850MB1 - DEC P50 20MB 270MB1 - Cidex P133 64MB 2GB1 - NEC V466 16MB NoHDD1 - DEC P90MHz 40MB 425MB3 - Gateway P75 16MB 850MB1 - IBM P66 16MB 640MB1 - HP P75 16MB NoHDDNotes:- All systems have been tested and are working- All have floppy drives- Case types are both desktop & tower- NO operating system, monitor, drivers, keyboard, mouse, power cords, etc..** Disclosures *** Systems are in good condition* Has cosmetic blemishes, examples of which are (but not limited to):* Missing bezel covers, back plates, expansion slot covers* Scratches in case* Hairline crack in case   More

USB 2.0 to IDE Adapter Cable - 2 for $29.99

USB 2.0 to IDE Adapter Cable - 2 for $29.99

** USB 2.0 to IDE Adapter Cable - 2 for $29.99 **The USB 2.0 to IDE Drive Adapter implements a bridge between one USB port and one ATA or ATAPI based mass storage device port. The USB 2.0 to IDE Drive Adapter turns any IDE drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. The Hi-Speed USB interface provides for easy installation with its Plug and Play design. The adapter supports all existing IDE/ATAPI devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives.General Features:- USB to IDE Cable- 2.5-feet long- Connect any device with an IDE Interface to a PC with USB interface- Transfer rate Approx. 480 MBps- Complies with USB 2.0 standards- Backwards compatible to USB 1.1 standards- Complies with ATA/ATAPI-66 Spe. V1.0- Easy to Install- Supports IDE and enhanced IDE hard drives- Supports ATA/ATAPI CD-ROM/R/RW DVD-ROM and more- External power adapter for IDE/ATAPI devices- Linux 2.4.X compatibleRegulatory Marks- FCC- CE- TUV-GS- CCCRetail Package Includes - USB to IDE adapter cable- Power adapter and cord- Driver CD Compatibility/Requirements/Disclosures:** Requirements *** PC Requirements:* Windows 98/2000/XP* CD-ROM* USB Port* Power outlet* Macintosh Requirements:* Mac 9.2* CD-ROM Drive* USB Port* Power outlet More ...

ClipArt 25,000 Vol 2

ClipArt 25,000 Vol 2

Add fun, excitement, and personality to all of your communications.This unique collection features 25,000 all new imagesperfect for newsletters, fliers, brochures, greeting cards, - justabout any kind of project. Choose images from a variety of stylesto suit your tastes. Windows 95/98/ME/2000/XP More ...

Serial-ATA to ATA/ATAPI IDE Interface Adapter

Serial-ATA to ATA/ATAPI IDE Interface Adapter

** Serial-ATA to ATA/ATAPI IDE Interface Adapter **This adapter allows you to convert a IDE drive for use with a SATA connector. Take your new board with SATA connectors and use your standard IDE drives with this amazing device.General Features:- One to One Serial ATA (SATA) to Parallel ATA interface adapter- Compliant with Serial ATA 1.0 specification- Supports data rate of 1.5Gb/s for Serial ATA mode transferring- Supports Ultra ATA 133 and backward compatibility- Support 3.5” IDE hard drive and 5.25” CDROM- Power-On and Read/Write access LED indicators- Driverless (No driver required)Power adapter Features:- Convert a single 12V input to FDD and HDD power connectors with 5V and 12V outputs- Suitable for any 3.5-inch Hard Drives and 5.25-inch Optical devices - Built-in On/Off switch- Two LED indicators showing operation status of 5V and 12V - Specially designed to suit any 12V power supply with at least 1.6 AmpereSpecifications:- Serial-ATA (SATA) Interface- Serial-ATA 1.0 specification compliant- External power connector- IDE Interface- Support ATA PIO and UDMA modes- Support 3.5-inch IDE hard drive and 5.25-inch optical drivesRegulatory Approvals:- FCC- CE- C-Tick- VCCIRetail Package Includes:- Serial-ATA to IDE adapterNotes: - Model: SD-ADSAIDE-S1- UPC: 8 93049 0063 2 Compatibility/Requirements/Disclosures: ** Requirements *** Windows 98SE/Me/2000/XP* PC computer with one Serial-ATA port More ...

iPod 6-Ft 3.5mm Male to Male Stereo Cable (White)

iPod 6-Ft 3.5mm Male to Male Stereo Cable (White)

** iPod 6-Foot 3.5 mm Male to Male Stereo Cable **This 6-foot Audio Cable connects your iPod, portable CD players or any stereo audio source with a 3.5 mm headphone jack to a stereo receiver or multimedia speakers that use 3.5 mm stereo input. Get yours today!General Features:- White cable- 6-foot- Two (2) 3.5 mm male stereo male jacksNotes:- Cable Only Compatibility/Requirements/Disclosures: ** Requirements *** The need for this cable More ...

3-Button PS/2 Backlit Optical Scroll Mouse (Red)

3-Button PS/2 Backlit Optical Scroll Mouse (Red)

** 3-Button PS/2 Illuminating Optical Mouse **This 3-button light up mouse will be a nice addition toyour custom system. This mouse offers a PS/2 interface and the luxury of optical tracking. Cleaning your mouse is now a thing of the past!General Features:- Red and clear design- Scroll wheel lights up blue- Bottom and back light up red- PS2 interface- Optical tracking- 3-button layout- Scroll wheel acts as third button- Ergonomic design for left and right-handed users- Precise cursor movementRegulatory Approvals- FCC- CERetail Package Includes:- 3-Button USB light-up mouse Compatibility/Requirements/Disclosures:** Requirements *** Microsoft Windows 95/98/NT/2000/ME/XP * Available PS/2 mouse port More ...

IconForge version 6.34 released

The latest update to the IconForge version 6 series has been released. Several improvements are included. Existing version 6 licensees can obtain a free update patch from the CursorArts site.